The automotive paint makes an area or component visually appealing and maintains it against the possible rusting, UV degradation, and damage from wear. A flawless finish not only increases the visual appeal of the vehicle but also protects it from rust, UV, and day-to-day everyday wear. Ultimately, paint failure is quite often with peeling, cracking, or fading, even with the due season and skillful application. Henceforth, with an understanding of the art and science behind a perfect finish, we at Central Paints Trade offer high-quality automotive paints, primers, and body shop supplies to ensure you get it right the first time.
This guide examines the real-world causes of paint failure and offers guidance on how to avoid those costly mistakes.
Poor Surface Preparation
The very first process in painting is the preparation of the surface. Even dirt, oils, rust, or residue from old paint will keep a paint job from sticking properly, resulting in peeling or flaking.
Pro tip: A soiled surface can be cleaned with a widely accepted surface cleaner or degreaser. For such applications, always use prep & cleaning products so that a panel is perfectly clean prior to painting. Sanding irregularities while smoothing rough rust spots will ensure that paint sticks to the surface.
Wrong Primer Type or Too Little Primer
Primer is the backbone of a lasting finish. Forgetting this step or using an unsuitable primer for a particular substrate will more than likely spoil finishes with cracks or inconsistent curing on the substrate surface.
Central Paints Trade provides a complete selection of primers and fillers designed to work with different surface types from steel to plastic. The right choice of primer will assure a top-coat fit and consequence to long-term loss.
Wrong Mixing & Application
Even the best of high-quality automotive paints will go to waste if there is wrong mixing of paint, hardener, or thinner in ratio. Over-thinning can give runs, while under-thinning may yield rough textures or crack.
For professionals, we recommend mixing systems and products such as our basecoat/clearcoat sets Our paint mixing guides present you with step-by-step instructions.
Environmental Modes
Humidity, temperature, and sun exposure have a major say in paint life. Oversaturation of air humidity while falling cold can beset blistering, peeling, or slow curing; direct enter of sunlight could corrode with time.
High-quality automotive coatings from Central Paint Trade designed to withstand extremes of temperatures can help safely mitigate these hazards. UV-resistant clearcoats on offer render further assistance in avoiding fading and environmental severities.
Ignoring Curing & Drying Time
Another thing that is vital for the paint to last through is adequate curing; with the second more often than not taken for granted. Very much worthy to note: Badly timed drying causes paint failures. Unhurried curing is a necessity for any product. Quickening drying through inappropriate heat or airflow can however lead to cracking, uneven gloss, or delaminating.
When it comes to drying and curing times, manufacturers know best. Put to use our professional-grade drying and curing solutions, which will guarantee an immaculate finish.
Preventing Paint Failures: Best Practices
- Cleaning and sanding surfaces before painting should always be done
- Select the correct primer and paint system for the substrate
- Stick to accurate mixing ratios for paint, hardeners, and thinners
- Apply in the recommended environmental conditions
- Allow adequate curing time for a durable finish
If you adhere to the procedures using the appropriate products from Central Paints Trade, your vehicle finishes will stand the test of time. Therefore, not only will your work be beautiful from day one, but it will also remain so during future days!
Conclusion: Get It Right the First Time
Paint failures are costly, frustrating, and most of all, avoidable. The selection of high-quality automotive paints, primers, and supplies is a must for either the professional bodyshop or DIY guy. Central Paints Trade provides a complete line of high-quality paints, primers, clearcoats, hardeners, and spray tools to guarantee that each job goes right.
Have questions about the right products or need expert advice for your project?
Contact us today and our team of automotive paint specialists will guide you to the perfect solution for a flawless finish.
Leave a comment